I] ALL SS PRESSURE GAUGE COCK

• Type :2 Way / 3 Way
• Material :AISI 316 SS / AISI 316L SS / AISI 304 SS
• Gaskets / Seals :PTFE
• Maximum working pressure :100 bar
• Maximum working temperature :180°C
• Vent hole for drain Backelite cover on handle

II]   All SS SNUBBER / DAMPENER

• Material :AISI 316 SS/ Monel / Hastelloy C (Others on request)
• Gaskets / Seals :Viton
• Maximum working pressure :400 bar
• Maximum working temperature :180°C
• Adjustable needle design also available 

III]  GAUGE SIPHON

• Type : Coiled / Pig-tail / U-type
• Max working pressure :160 bar
• Max working temperature : 400°C
• Material :AISI 316 SS / ASTM A105 / AISI 304 SS (Others on request)
• 3 different loop designs Tig welded & hydro-tested Seamless pipes construction Threads welded

IV]  GAUGE SAVER

• Type :Bellows / Piston / Diaphragm
• Range :200 mbar to 400 bar
• Material :AISI 316 SS, Monel Hastelloy C ( Others on request)
• Maximum working pressure :600 bar
• Operating temperature :180°C

V]  COOLING TOWER

• Type :Fin, Perforated, Capillary, Miniature fin
• Material :AISI 316 SS
• Maximum working pressure :1000 bar
• Maximum working temperature :300°C
• All SS construction 3 variable designs

VI]  FLUSHING RING

• Flange Size : 1/2" - 5"
• Material :AISI 316 SS, Monel, Hastelloy C (Others on request)
• Maximum working temperature :300°C
• Flange facing :Raised face
• Dual flushing ports Flanged & in-line seal designs 

VII]  BALL VALVE

• Stem type :Bolted bonneted
• Wetted parts :AISI 316 SS, AISI 316L SS, Monel
• Stem :Single bonnet
• Max. working pressure :206.85 bar (3000 psi)
• Max. working temperature :240°C
• Economical version Leak point reduction

VIII]  NEEDLE VALVE

• Stem type :Hard seated stem
• Wetted parts :AISI 316 SS, AISI 316L SS, Monel
• Stem :Conical metal tip
• Max. working pressure :413.7 bar (6000 psi)
• Max. working temperature :240°C
• Isolation valve Back seating to prevent stem blow-out

IX]  CHECK VALVE

• Type :Poppet & Spring
• Wetted parts :AISI 316 SS, AISI 316L SS, AISI 304 SS
• Stem :Single bonnet
• Max. working pressure :103.42 bar (1500 psi)
• Max. working temperature :240°C
• Economical version Leak point reduction

X]  MULTIPORT VALVE

• Stem type :Hard seated stem
• Wetted parts :AISI 316 SS, AISI 316L SS, Monel
• Stem :Conical metal tip
• Max. working pressure :413.7 bar (6000 psi)
• Max. working temperature :240°C
• Multi-port valve Back seating to prevent stem blow-out Isolation Test & Drain